Nyheter

Home/Nyheter/Detaljer

Strukturella egenskaper och klassificering av kraftmätare

1, enligt kraven i kraftsystemklassificeringen:

 

Den primära distributionsutrustningen som kallas Power Distribution Center är centralt installerat i företagets transformatorstationer för att distribuera kraft till lägre nivå distributionsutrustning på olika platser . Denna nivå av meterboxen är nära ansluten till Step-down-transformatorn, med höga krav för elektriska parametrar och en stor produktionskapacitet .} Power Distribution till den allmänna termen för Power Distribution och MOTOR OCH MOTOR OCH MOTOR .} Skåpet används för lastdistribution och situationer med färre kretsar .

 

The motor control center is used for situations where the load is concentrated and there are multiple circuits. They distribute power from one circuit of the upper level distribution equipment to nearby loads. This level of equipment must protect, monitor, and control loads. Power distribution equipment is always referred to as lighting distribution boxes. They are far away from the power supply center and are dispersed Distributionsenheter med liten kapacitet .

 

news-800-800

 

2 klassificeras kraftmätaren enligt dess strukturella egenskaper och användning:

 

Fixed panel switch gear, also known as switch board or distribution panel, is an open switch cabinet with panel blocking. It has a protective function on the front, and the back and sides can still contact the electrified parts. The protection level is low and can only be used in industrial and mining enterprises with low requirements for power continuity and reliability. Centralized power supply in the substation rum .
Protective switchgear refers to low-voltage switchgear that is enclosed in all aspects except for the installation surface. The electrical components of the cabinet, such as switches, protections, and monitoring controls, are installed inside sealed enclosures made of steel or insulating materials and mounted on reliable walls or walls. Isolation measures can be omitted between the circuits inside the Skåp eller jordade metallplattor eller isoleringsplattor kan användas för separering .

 

Usually, there is mechanical transmission for the operation of doors and main switches. In addition, there is a protective belt switch cabinet (console) equipped with household appliances such as control, measurement, and signal. Protective switchgear is mainly used as a power distribution device in workshops. The drawer type switch device is made of a steel plate enclosed shell, and the electrical Komponenter som kommer in och lämnar kretsen är installerade i en avtagbar låda och bildar en funktionell enhet som utför specifika typer av kraftverksamhet .

 

A grounded metal plate or plastic functional board is separated between the functional unit and the bus or cable, forming three areas: the bus, functional unit, and cable. There are also isolation measures between functional units. Drawer style switchgear has high reliability, safety, and interchangeability, and is a relatively advanced switchgear. Most of the produced switchgear are drawer Style SwitchGear . Lämplig för industri- och gruvföretag och höghus med hög strömförsörjning, används som ett centraliserat kontrolldistributionscenter .